Soil Resistivity Testing – Common Mistakes
We take a look at soil resistivity and provide practical advice on what is ground soil resistivity, why we measure it and these common mistakes when Soil Resistivity Testing:
Soil Resistivity Testing Method – The Wenner 4 Probe Test
Introduction to the Wenner 4 Probe Test The Wenner probe test is a geotechnical investigation method used to determine the electrical resistivity of the soil. Soil resistivity testing can be carried out using different methods. The Wenner 4 Probe test is one of the most common of these. Furthermore, its one of the three most […]
Soil Resistivity Testing Method -The Schlumberger Array
The Schlumberger array is a geotechnical investigation method which determines the electrical resistivity of the soil. This is similar to the Wenner probe test, but it uses multiple current electrodes rather than just two. This allows for a more detailed and accurate measurement of soil resistivity. Soil resistivity testing carried out using different methods, this […]
Soil Resistivity Testing Method – Driven Rod
Soil Resistivity Testing Method – Driven Rod The driven rod test is a geotechnical investigation method which determines the resistance of soil to the penetration of a rod or other penetrometer. The Soil resistivity is determined using different Soil Resistivity Testing methods. However the Driven Rod, described below is the last of the three most […]
